CP210x Windows XP/2003/Vista(32/64)/7(32/64) Driver v6.0 Release Notes
Copyright (C) 2010 Silicon Laboratories, Inc.

This release contains the following components:

* x64 directory
	* silabser.sys
	* silabenm.sys
* x86 directory
	* silabser.sys
	* silabenm.sys
* CP210xVCPInstaller.exe (v2.6)
* setup.ini
* silabser.cat
* slabvcp.inf
* ReleaseNotes.txt (this file)


Driver Installation
-------------------

	See Kit User's Guide for installation instructions.


Release Dates
-------------
	CP210x Windows XP/2003/Vista(32/64)/7(32/64) Driver v6.0 - May 27, 2010


CP210x Windows Driver Revision History
--------------------------------------

version 6.0
	Corrections
	-----------
	Corrected multiple blue screens and driver hangs related to race conditions in the driver
	Corrected problem where driver hangs when 4 or more devices are connected to a single
	transaction translator hub
	Corrected bugs that prohibited serial enumeration
	Corrected problem where IO requests were not completed/cancelled on a close
	Corrected problem with dialing out or PPP connections
	
	New features/Enhancements
	-------------------------
	Created IO queueing mechanism so that multiple reads, writes, etc. can be queued and
	waited on

version 5.4.29
	Corrections
	-----------
	Fixed a bug which causes GET_COMM_STATUS to take longer than expected (previously corrected
	in version 5.3)
	Corrected several conditions which cause blue screens
	Corrected bug in surprise removal which can cause a blue screen
	Corrected bug where TX_EMPTY wasn't being reported properly

	New features/Enhancements
	-------------------------
	Added Windows 7 to the general installer for XP/2003/Vista under KMDF 1.9
	Modified driver to support selective suspend in Vista/7
	Updated silabenm.sys to include latest changes from serenum in the WDK
	WHQL Certified for XP/2003/Vista(32/64)/7(32/64)

version 5.4.24
	Corrections
	-----------
	Fixed a bug which caused a random crash if a write took longer than normal to complete

	New features/Enhancements
	-------------------------
	WHQL Certified for XP/2000/2003/Vista(32/64)

version 5.4.23
	Corrections
	-----------
	Fixed a bug which caused a crash if the device is surprise removed during communication.
	Fixed a bug which incorrectly uses the TX_EMPTY flag.
	Fixed incorrect/incosistent status return values.
	Corrected the default software flow control values

version 5.4
	Corrections
	-----------
	Fixed bug where the first packet of data is dropped in Windows 2000.
	
	New features/Enhancements
	-------------------------
	Added support to keep all GPIO pin states and all baud rate and line control data if
	the device loses power during standby or hibernation.
	Updated to use the latest version 1.7 of KMDF

version 5.3
	Corrections
	-----------
	Corrected the IOCTL_SERIAL_SET_QUEUE_SIZE to allow expansion of the receive buffer.
	Modified driver to limit the device access only when necessary to improve performance.
	Corrected a case where read interval timeouts do not get started properly.

version 5.2.2
	Corrections
	-----------
	Fixed a bug that was causing random bluescreens after a device is opened and closed.

version 5.2.1
	Corrections
	-----------
	Fixed a bug caused by the previous fix for incomplete reads in Hyperterminal.
	Fixed a bug when using the Manufacturing DLL where no data comes back from the part for
	customization type settings in Vista 64.


version 5.2
	Corrections
	-----------
	Fixed a BAD_POOL_HEADER blue screen issue.
	Fixed a crash during surprise disconnect in HyperTerminal on Vista.
	Fixed a problem causing various incomplete reads, sometimes visible in HyperTerminal.
	
	New features/Enhancements
	-------------------------
	CP210xVCPInstaller.exe updated to v2.4.
	
	
version 5.1
	Corrections
	-----------
	Multiple devices can be used now with no problems.
	Driver now correctly works with the MSCOMM ActiveX control.


version 5.0
	New features/Enhancements
	-------------------------
	Driver has been updated to use the KMDF.
	Driver now includes a Serial Enumeration filter driver.
	WHQL Certified for XP/2000/2003/Vista(32/64).


version 4.40
	New features/Enhancements
	-------------------------
	Driver has been updated to include Vista (x86/x64) support.
	CP210xVCPInstaller.exe updated to v2.0.


version 4.38a
	New features/Enhancements
	-------------------------
	Driver version 4.38 is the same, however the installation procedure changed and a new
	installation utility has been provided.

	INF files have been changed to be independent of the installer, making reseller submissions
	easier.

	Windows 2K\XP\2003 now all have the same catalog file making the installation a single
	utility for all OS's.


version 4.38
	New features/Enhancements
	-------------------------
	Extended surprise removal support added to fix COM port hang.
	WHQL Certified for Windows XP and 2000.


Version 4.28a
	New features/Enhancements
	-------------------------
	WHQL Certified for Windows XP and 2000.


Version 4.28
	New features/Enhancements
	-------------------------
	Includes Preinstaller executable and with added preinstaller support in uninstaller
	executable and ini files.
	
	Corrections
	-----------
	Fixed driver lock condition caused by certain invalid port settings.

	Fixed Windows 98 PreInstaller issue.


Version 4.20

	New features/Enhancements
	-------------------------

	Changed driver binary file names from cyg_* to slab*.  Also changed 
	default inf file strings to SLAB and Silicon Laboratories.

	This installation includes catalog files for Windows 2000/XP Windows 
	Hardware Quality Lab (WHQL) Certification.

	
	Corrections
        -----------

	Modified behavior of SERIAL_EV_TXEMPTY event notification.  Applications 
	will no longer miss TXEMPTY events if a	write is pending during the 
	IOCTL_SERIAL_WAIT_ON_MASK control request.


Version 4.16

	New features/Enhancements
	-------------------------
	
	Corrections
        -----------

	Changed behavior for IOCTL_SERIAL_LSRMST_INSERT for correct modem 
	event insertion.


Version 4.09
	
	Initial Release


